Ubee DVW326 User Manual page 79

Ubee Interactive
Generate WEP Keys
Apply
Automatic Security Configuration — Sets up WPS (Wi-Fi Protected Setup) for devices connecting
to the wireless network.
WPS/Disabled
WPS Config State
Device Name
WPS Setup AP
UUID
PIN
Generate AP PIN
WPS Add Client
Add a client
Client PIN
Authorized Client MAC
9.2.1 Enabling a Closed Network on the Primary Network
You can enable the Closed Network option so the SSID cannot be broadcast or seen by
others.
Steps
To enable a closed network:
1. Access the pull down menu for the Closed Network.
2. Choose Enabled to enable a closed network. Automatic Security Configuration is
disabled.
Ubee DVW326 Advanced Wireless Voice Gateway Subscriber User Guide • March 2014
Label
Forces the device to generate 4 WEP keys automatically.
Saves changes.
Enables or disables WPS option. When enabled, the
following fields are available:
Defines if the WPS has been configured or not.
Defines a name for this wireless cable modem for WPS.
Defines the universal unique identifier (UUID) for this access
point.
Defines the Personal Identification Number for this access
point.
Creates a new PIN for this access point.
Activates wireless protected setup (WPS) security on the
device.
To add a client:
1. Click Add a client. The WPS Add Client screen is
2. Click PUSH on the WPS Add Client screen.The WPS
3. Press the WPS button on the client device.
Defines a PIN number for client access.
Defines the MAC address of the authorized client.
Description
displayed.
button is activated on the device, indicated by a flashing
white light on top of the unit.
Using the Primary Network Option
75