Fuji Xerox DocuPrint CM215 series User Manual page 104

Windows 8, Windows 8 64-bit Edition, or Windows Server 2012
1
On the Desktop screen, place the mouse pointer in the upper right corner of the screen and
move the mouse down, and then select Settings.
2
Click Control Panel
and Printers.
3
Click Add a printer.
4
Select a printer or click The printer that I want isn't listed.
If you have selected your printer, go to step 7.
If you have clicked The printer that I want isn't listed, go to step 5.
5
Select Add a printer using a TCP/IP address or host name, and then click Next.
6
Select TCP/IP Device from Device type, and enter the IP address in the Hostname or IP
address box, and then click Next.
7
Click Have Disk to display the Install From Disk dialog box.
8
Click Browse, and then select the extracted setup information (.inf) file in
File" on page 95.
9
Click Open.
10
Click OK.
11
Select your printer name and click Next.
12
To change the printer name, enter the printer name in the Printer name box, and then click Next.
Installation starts.
If the User Account Control dialog box appears, click Yes.
NOTE:
• If you are an administrator on the computer, click Yes; otherwise, contact your administrator to continue
the desired action.
13
If you do not want your printer shared, select Do not share this printer. Otherwise, select Share
this printer so that others on your network can find and use it.
14
Click Next.
15
To use this printer as the default printer, select the Set as the default printer check box.
16
Upon completion of the driver installation, click Print a test page to print a test page.
17
Click Finish.
104 Printer Connection and Software Installation
Hardware and Sound (Hardware for Windows Server 2012)
→
Devices
→
"Getting the Driver