Sending A Fax Manually - Fuji Xerox DocuPrint CM215 series User Manual

 Sending a Fax Manually
1
Load the document(s) facing up with top edge in first into the ADF or place a single document
facing down on the document glass and close the document cover.
See also:
• "Loading an Original Document on the ADF" on page 241
• "Loading an Original Document on the Document Glass" on page 242
2
Press the Fax button.
3
Adjust the document resolution to suit your fax needs.
See also:
• "Resolution" on page 243
• "Lighten/Darken" on page 244
4
Select OnHook, and then press the
5
Select On, and then press the
6
Enter the fax number by one of the following way.
• Enter the fax number of the remote fax machine using the numeric keypad.
• Press the One-touch button.
• Press the Address Book button, press the
the button.
• Press the Speed Dial button. Enter the speed dial number between 01 and 99 using the
numeric keypad, and then press the
7
Press the (Start) button.
8
Select Manual Send, and then press the
NOTE:
• Press the (Stop) button to cancel the fax job at any time while sending the fax.
246 Faxing (DocuPrint CM215 f/CM215 fw Only)
button.
button.
button to select the recipients, and then press
button.
button.