Margin Top/Bottom - Fuji Xerox DocuPrint CM215 series User Manual

 Margin Top/Bottom
Specify the top and bottom margins of the copy.
1
For the DocuPrint CM215 f/CM215 fw, firstly load the top edge of document(s) with facing up into
the ADF or place a single document facing down on the document glass and close the document
cover.
For the DocuPrint CM215 b, place a single document facing down on the document glass, and
close the document cover.
See also:
• "Making Copies From the ADF (DocuPrint CM215 f/CM215 fw Only)" on page 174
• "Making Copies From the Document Glass" on page 172
2
Press the Copy button.
3
Select Margin Top/Bottom, and then press the
4
Press the or
the button.
NOTE:
• Asterisk (*) is the factory default setting.
4mm*/0.2 inch*
0-50mm/0.0-2.0 inch
5
If necessary, customize the copy settings such as the number of copies, copy size, and image
quality.
See also:
• "Setting Copy Options" on page 175
6
Press the (Start) button to begin copying.
188 Copying
button or enter the desired value using the numeric keypad, and then press
Factory default setting.
Specify the value in increments of 1 mm/0.1 inch.
button.