Lan Settings - Furuno FELCOM 250 Operator's Manual

6. WEB FUNCTIONS
6.1.4

LAN settings

The LAN Settings must be performed by the network manager.
How to set the LAN IP address
Click [Settings] in the menu bar, the [Network settings], [LAN] and [IP address] in the
sub-menu. The following screen appears.
Own IP address
IP address
Subnet mask
DHCP Server
Lease information button
DHCP
From
To
Apply button
Cancel button
6-8
Item
Enter the LAN IP Address (IPv4 Address). Factory
setting is [192.168.1.1.].
Select the LAN Subnet mask.
Go to the DCHP lease information screen.
Use: Use DHCP Server in the communication unit.
Unuse: Do not use DHCP Server.
Enter assigned commencement IP address (IPv4 ad-
dress). Factory setting is [192.168.1.10].
Enter assigned last IP address (IPv4 address). Facto-
ry setting is [192.168.1.254].
Click to apply settings. The screen shows "The Cm-
mUnt will restart automatically after this settings. Con-
tinue?" → [OK] button → "Completed. Please wait a
moment for restarting." displays → press the [OK]
button to close message → Equipment restarts.
Restore previous settings.
Description