3. Initial Settings
3.1 NMEA Setting
NMEA port
1. Press the [MENU] key.
2. Press the software key labeled "CONFIGURATION".
3. Press the software key labeled "SETUP NMEA PORT1".
4. Select "FORMAT" by the arrow key.
5. Press the software key labeled "EDIT" to display the following message.
SETUP
OUTPUT FORMAT
PORT 1
s FORMAT
NMEA 0183
VER 1.5
NMEA0183 Ver1.5
' NMEA0183 Ver2.0
ENTER
CANCEL
DGPS 3D
Figure 3-1 Output Format display, NMEA port
6. Select NMEA version desired by the arrow key.
7. Press the software key labeled "ENTER".
8. Press the [PLOT] key to finish.
3-1