How To Set The Signature And Password - Furuno FELCOM 250 Operator's Manual

5.5.7

How to set the signature and password

You can set up the SMS signature and password in the SMS Settings screen.
Signature
Add a signature to all SMS messages automatically as follows:
1. Click [SMS] in the menu bar.
2. Click [SMS settings]. The [SMS settings] screen is displayed as shown:
3. To automatically add a signature, place a [ ] in the checkbox beside [Add signa-
ture]. Leave the checkbox empty not to add a signature. If adding a signature, go
to step 4. If not adding a signature go to step 5.
4. Enter a signature in the Signature box. (Maximum 156 characters).
5. Click the [Apply] button. The message "Setting completed." is displayed.
6. Click the [OK] button.
Password
To activate password to access the SMS top screen, do the following.
1. Click [SMS] in the menu bar.
2. Click [SMS settings] in the sub menu area.
3. Erase the [ ] in the [Save password] checkbox.
4. Click [Apply]. The message "Setting completed." appears.
5. Click the [OK] button. Hereafter, a password is required to open the SMS menu.
5. WEB SOFTWARE
Remaining character count
5-15