Furuno FELCOM 250 Operator's Manual page 78

3. SETTINGS FOR HANDSET
14. Enter the default gateway (IP address of the router) and press the Enter key.
15. Press the
16. Press 2 to select the [DNS] menu to show the [DNS obtain] screen.
17. Press
[Static]: Set Primary and Secondary DNS server addresses manually.
[DHCP]: Obtain DNS server address automatically from the DHCP server.
18. Press the Enter key. Do one of the following depending on selection made at step
17.
If you select the [static] at step 17, the DNS entry screen appears. Go to step 19.
If you select the [DHCP] at step 17, the [Manual set.] screen appears. Go to step
24.
19. With the [DNS (Primary)] field selected, press the Enter key.
20. Enter the IP address of the primary DNS server and press the Enter key.
21. Press
22. Enter the IP address of the secondary DNS Server and press the Enter key.
Note: If only the Secondary DNS Server address is entered, the Primary DNS is
set to the same value.
23. Press the
24. Press the
3-16
key to return to the [Manual set.] menu.
or to select the method for obtaining the DNS server address.
DNS factory default settings
to select the [DNS (Secondary)] field, and press the Enter key.
key to return to the [Manual set.] menu.
key to close the menu.