How To Change The Fuse - Furuno FELCOM 250 Operator's Manual

7. MAINTENANCE AND TROUBLESHOOTING
Check item
Handset LCD Screen
7.2

How to Change the Fuse

The fuse in the power cable protects the unit from overcurrent. If you cannot turn on
the power, check if the fuse has blown. If the fuse has blown find the cause before re-
placing the fuse. If the fuse blows again after replacement, call your dealer for advice.
Part
Fuse
7-2
Check the screen for dust
and dirt, and that there are
no cracks on the screen.
WARNING
Use the proper fuse.
Use of a wrong fuse can result in damage
to the equipment and cause fire.
Type
FGBO 125V 15A PBF
FGBO 125V 7A PBF
Checkpoint
Take caution when clean-
ing or blowing on the
screen, because it damag-
es easily. Wipe the LCD
carefully to prevent scratch-
ing, using tissue paper and
an LCD cleaner. To remove
dirt or salt deposits, use an
LCD cleaner, wiping slowly
with tissue paper so as to
dissolve the dirt or salt.
Change paper frequently
so the salt or dirt will not
scratch the LCD. Do not
use thinners, acetones, al-
cohol, paint remover or oils
to clean the screen as they
can damage the screen
coating.
Code number
000-155-827-10
000-155-831-10
Countermeasure
Description
for 12 VDC
for 24 VDC