Table of Contents
Advertisement
3.
INITIAL SETTINGS
3.1
NMEA Setting
NMEA port
This setting should be done when connecting with other equipment, autopilot, radar or
remote display.
1. Press the [MENU] key.
2. Press the CONFIGURATION soft key.
3. Press the SETUP NMEA PORT1 soft key.
4. Press the cursor pad to select FORMAT.
5. Press the EDIT soft key to display the following window.
6. Select NMEA version depending on the specification of the equipment connected. The
selected item is indicated by black button.
7. Press the ENTER soft key.
8. Press the [PLOT] key to return to the plotter display.
8
OUTPUT FORMAT
NMEA0183 Ver1.5
NMEA0183 Ver2.0
DGPS 3D
Output format window (PORT 1)
SETUP
PORT1
ENTER
CANCEL
Hide quick links:
Advertisement
Table of Contents
