How To View The Data Communication Log - Furuno FELCOM 250 Operator's Manual

6. WEB FUNCTIONS
4. To search the log, do the following:
1) Click the [Search] button to display the Search bar. (Click the [Search] button
again to hide the Search bar).
Search bar
2) To search by date, enter part or all of the date in the [Date] field. To search by
phone number, enter part or all of the number in the [Connection] field.
Matching search results appear below the Search bar.
Note: If select [AMBE], [3.1kHz Audio], [RDI] or [UDI] in the [Service] list, only
the corresponding logs are displayed. Or, if [Outgo] in the [Dir] list box is se-
lected, only outgoing messages are displayed.
5. To arrange the log in ascending or descending order, do the following:
1) At the top of the log list, click either [Date], [Service], [Dir], [Duration], [Con-
nection], or [Error].
2) Click the item again to change between
der.
6. To save the log to a CSV file, click the [Save CSV] button. (refer to section 6.3.1
for detailed information).
6.3.3

How to view the Data communication log

To view the Data communication log do the following:
1. Click [Log] in the menu bar.
2. Click [Air interface].
3. Click [Data connection]. The following Data connection log screen displays:
1 Communication start date and time
2 Communication time ("Connected" displays under connection)
3 Transmitted data amount Under connection, data amount is displayed.
4 Connection service Standard 8kbps, 16 kbps, 32kbps 64kbps
5 Name of other party
6 Error code ("--" is displayed if there is no error)
6-28
appears beside the selected item.
2
1
If Streaming, "--" is displayed)
(ascending) or
5
3 4
128kbps 256kbps(FELCOM500 only))
(descending) or-
6