How To Change The Sms Password - Furuno FELCOM 250 Operator's Manual

6. WEB FUNCTIONS
Ping
DST. address
Execute button
NSlookup
DST. address
Execute button
6.1.8

How to change the SMS password

Do the following procedure to change the SMS password. Make sure to write down
and not forget the password. If the password is lost, contact the dealer or retail suppli-
er. If this occurs, FELCOM 250/500 must be reset to factory settings (refer to section
7.7.2).
1. Click [Settings] in the menu bar.
2. Click [SMS server setting]. The following SMS server setting screen appears.
3. Enter the current SMS password in the [Current password] field. Characters are
displayed as black circles.
4. Enter the new password in the [New password] field (Maximum 8 characters).
5. Enter the new password again in the [Confirm new password] field.
6. Click the [Apply] button. The message "Setting completed" appears.
Note: The following error messages can occur:
• Current Password isn't correct: The current password was entered incorrectly.
6-22
Item
Enter the recipient address (ASCII only: max. 256 char-
acters).
Execute the ping command. The results appear in the
text area below. Every time a ping is performed the re-
sults update in the text area.
Enter the recipient address. (ASCII only: max 256 char-
acters).
Execute Nslookup command. The results appear in the
text area below. Every time a command is performed,
the results are updated.
Description