Other Functions - Omron SYSDRIVE 3G3EV-A



-CUE Installation Manual

Overview
H LVD and EMC Directives
The SYSDRIVE EC Directives Models conform to the LVD (prEN50178) and the EMC (EN50081-2,
EN50082-2) Directives.
However, when the product is built into a unit, the connected switches, optional items, or motors may not
satisfy these Directives. In such a case, either use components that meet the Directives or take ap-
propriate countermeasures such as providing surge killers or other noise prevention devices.
H Required Conditions
There are several conditions that must be satisfied for this Inverter to conform to the LVD and EMC
Directives. To satisfy the Directives, meet the instructions in this manual for the following installation
conditions.
• Installation of noise filters and clamp core.
• Shield braided cables must be used for input and output cables.
Limitations on the lengths of cables.
• Installation of recommended fuses on the input side.
H Other Functions
This manual describes installation and wiring methods for conforming to the LVD and EMC Directives.
Refer to the User's Manual for detailed information on the functions of the Inverter.
• 3G3EV-series Standard Model:
SYSDRIVE 3G3EV Compact Low-noise Inverter (I011-E1)
• 3G3EV-series Multi-function Model:
SYSDRIVE 3G3EV Compact Low-noise Inverter (I013-E1)
Chapter 2
2-3