Sony LBT-ZUX10D Operating Instructions Manual page 63

Creating the "MAX" and "JUMP"
effect manually
1
Press X-ROUND ON/OFF
repeatedly until "X-ROUND"
lights up in the display.
The last selected X-ROUND mode
appears in the display.
2
Press X-ROUND MODE
repeatedly to select the
X-ROUND mode you want.
3
Press MAX/JUMP MODE
repeatedly on the unit to select
"MANUAL".
4
Press MAX PAD or JUMP PAD to
activate the "MAX" or "JUMP"
effect anytime you like.
Notes
• You cannot activate "MAX" and "JUMP"
effect when RANDOM, RANDOM
POSITION or TWISTER is selected.
• When "TEMPO" is selected and you press
any buttons other than MAX PAD or JUMP
PAD to input the tempo or you connect or
disconnect the microphones or headphones,
the MAX/JUMP MODE is automatically set
to "MANUAL".
• If "Hit Faster" appears in the display, the input
tempo is below the lower limit of the tempo.
Hit again in faster tempo.
• If "Hit Slower" appears in the display, the
input tempo is above the upper limit of the
tempo. Hit again in slower tempo.
Using the drum pads
— BEAT BLEND
With the drum pads, you can add
percussion during playback. This effect
can be used with any source.
To add the drum sound
Make sure that "BEAT BLEND" lights up
in the display. Otherwise, press PAD A or
PAD B. "BEAT BLEND" lights up and
"BEAT BLEND ON" appears in the
display.
Press PAD A or PAD B to produce the
respective sound.
To change the drum sound
Hold down PAD A or PAD B and turn
OPERATION DIAL on the unit to select
the sound you want.
The name of the drum sound appears in
the display.
The sound you select will be stored in
PAD A or PAD B.
To create a drum roll
1
Hold down PAD A and PAD B at the
same time.
"CHAIN" appears in the display.
2
Turn OPERATION DIAL on the unit
clockwise to output the PAD B
sound and counter clockwise to
output the PAD A sound.
To adjust the volume of the drum
Press BEAT LEVEL repeatedly.
Note
You cannot use PAD A and PAD B when test
tone is performed.
Using the beat functions
With the beat functions, you can enjoy a
variety of rhythms. They can be used with
any source.
Make sure that "BEAT BLEND" lights up
in the display. Otherwise, press BEAT
ON/OFF.
1
Press BEAT ON/OFF repeatedly
to turn off the beat pattern.
l
Continued
63 GB