Table of Contents

Advertisement

4-255-416-11(4)
Compact
Hi-Fi Stereo
System
Operating Instructions
LBT-ZX10D
©2004 Sony Corporation

Advertisement

Table of Contents
loading

Summary of Contents for Sony LBT-ZX10D

  • Page 1 4-255-416-11(4) Compact Hi-Fi Stereo System Operating Instructions LBT-ZX10D ©2004 Sony Corporation...
  • Page 2 Digital Theater Systems. Inc. correctly as chemical waste. ® ENERGY STAR ® is a U.S. NERGY registered mark. As an E NERGY ® partner, Sony Corporation has determined that this product ® meets the E NERGY guidelines for energy efficiency.
  • Page 3: Table Of Contents

    Table of Contents How to use this manual......5 Tape – Recording Playable discs.......... 5 Recording your favorite tracks on a Getting Started disc onto a tape....... 47 — CD Synchro Recording Hooking up the system......8 Recording to a tape manually ....48 Positioning the speakers......
  • Page 4 Display Turning off the display......60 — Power Saving Mode Changing the power illuminator ... 60 Changing the spectrum analyzer display..........61 Adjusting the brightness of the display..........61 Viewing information about the disc in the front panel display ....62 Viewing information about the disc in the on-screen display ....
  • Page 5: How To Use This Manual

    How to use this manual Playable discs You can playback the following discs on this • This manual mainly explains operations using system. Other discs cannot be played back. the remote, but the same operations can also be performed using the buttons on the unit having the same or similar names.
  • Page 6 • DVD Audio discs. Region code of DVDs you can • DVDs with a different region code. playback on this system • Progressive JPEG format files. • Disc with non-standard shapes (e.g., heart, Your system has a region code printed on the square, star).
  • Page 7 Note on playback operations Cautions when playing a disc of DVDs and VIDEO CDs that is recorded in Multi Session Some playback operations of DVDs and VIDEO CDs may be intentionally set by software • This system can playback Multi Session discs producers.
  • Page 8: Getting Started

    Getting Started Hooking up the system Do the following procedures 1 to 8 to hook up your system using the supplied cords and accessories (page 81). FM lead antenna AM loop antenna Center speaker Surround speaker Surround speaker (Right) (Left) Front speaker Front speaker Unit...
  • Page 9 2 Connect the center speaker. 5 Connect the video input jack of your TV to the VIDEO OUT jack with the Connect the speaker cord to the SPEAKER supplied video cord. CENTER terminal on the unit and to the terminal on the center speaker as shown in “Tip”...
  • Page 10 8 Set the color system to PAL or NTSC depending on the color system of your The color system is factory set to NTSC for Operating a Sony TV region code 3 models, and PAL for other region code models. Each time you perform...
  • Page 11: Positioning The Speakers

    Attaching the speaker pads Positioning the speakers Attach the supplied speaker pads to the bottom There are 3 different ways to place the speakers. of the speakers to stabilize the speakers and to If you have connected an optional sub woofer, prevent them from slipping.
  • Page 12: Setting The Clock

    Notes Setting the clock • If you place the center speaker on the unit, be sure to place it at the front side of the unit. • Always place the sub woofer vertically, keeping it a Press ?/1 to turn on the system. few centimeters away from the wall.
  • Page 13: Performing Quick Setup

    Press repeatedly to select a Performing QUICK SETUP language, then press ENTER. The setting is selected and the You can set the initial settings of LANGUAGE “ROOM SIZE” display appears in the SETUP, ROOM SIZE, LISTENING on-screen display. POSITION and TV TYPE step by step in ROOM SIZE QUICK SETUP.
  • Page 14 Press repeatedly to select a TV type connected to the system, then press ENTER. “QUICK SETUP” is complete. If you make a mistake Press O RETURN, then select the item again. To quit QUICK SETUP Press DVD SETUP. To change the settings of QUICK SETUP Press DVD SETUP when playback is stopped.
  • Page 15: Dvd/Video Cd/Cd/Mp3/Jpeg - Play

    Playing a disc DVD/VIDEO CD/CD/MP3/JPEG – Play — Normal Play/Shuffle Play Loading a disc Use the buttons on the unit for the operation. Before playing a DVD, a VIDEO CD or JPEG image files, turn on your TV and select the video Press Z OPEN/CLOSE.
  • Page 16 When playing an audio CD: Select To play ALBM All MP3 audio tracks or Disc tray number Track number Playing time (Normal Play) JPEG image files in the album on the disc you have selected in original order. DISC For discs other than discs with MP3 audio tracks and ALL DISC S discs with JPEG image files,...
  • Page 17 Note Do this The play mode indication on the front panel display is Press M while displaying a Enjoy the slide different from the on-screen display as follows: show of JPEG JPEG image file. The slide show Front panel display On-screen display image files (one starts from the current image file.
  • Page 18: Resuming Playback From The Point You Stopped The Disc

    Notes Resuming playback from the • During playback in ALL DISC SHUF mode, you point you stopped the disc cannot select other discs by pressing DISC SKIP or one of the DISC 1~5 buttons on the unit. — Resume Play (Except for JPEG •...
  • Page 19: Playing Dvds Using The Menu

    Playing a track/file/chapter by Playing DVDs using the entering the track/file/chapter menu number Press the numeric button(s) to enter the track/ file/chapter number of the track/file/chapter you Some DVDs have menus to help you enjoy the want to playback. To enter the MP3 audio track DVDs.
  • Page 20: Playing Video Cds With Pbc Functions (Version 2.0)

    To cancel playback with PBC Playing VIDEO CDs with functions PBC functions (Version When playback is stopped, press . or > or the numeric buttons to select a track. 2.0) Press nN (or NX on the unit). “Play without PBC” appears on the TV screen —...
  • Page 21: Playing Repeatedly

    • You cannot select “REP” when the play mode is Playing repeatedly “ALL DISCS SHUF”. • You cannot select “REP1” for JPEG image files. — Repeat Play You can change the Repeat Play setting when playback is stopped. You can playback all the titles/tracks/files or a single title/chapter/track on a disc repeatedly.
  • Page 22: Creating Your Own Program

    Press ENTER. Creating your own Repeat Play starts. program When “SHUFFLE(ALL)” is selected, you cannot set Repeat Play to “ALL”. — Program Play When the play mode other than “CONTINUE(ALBUM)” and “SHUFFLE(ALBUM)” is selected for MP3 audio tracks or the play mode other than You can make a program of up to 25 steps in the “CONTINUE(ALBUM)”...
  • Page 23: Program Play

    Press ENTER. Using the on-screen display The disc, album or track is programmed. The program step number appears. Press FUNCTION +/– repeatedly until “DVD” appears in the front panel display. DISC Press PLAY MODE repeatedly when playback is stopped until “PGM” appears in the front panel display.
  • Page 24: Program Play

    x When programming an MP3 audio Press track The track list appears for audio CDs or For example, select track “3” of album “2”. VIDEO CDs. Press to select “ALBUM2”, then Program press Disc Track DISC 1 (CD) ALL TRACKS Program DISC 2 (–...
  • Page 25: Using The On-Screen Display To Search

    To clear a programmed step from Using the on-screen the end of a program display to search Press CLEAR in step 7. Notes • Program Play is not available for DVDs and JPEG image files. • When you switch the play mode to “PROGRAM” You can search a title (DVD), chapter (DVD), while “REPEAT TRACK”...
  • Page 26 Press ENTER. Searching for a chapter/index The list of contents in the disc appears. Press DVD DISPLAY. Jump bar The Control Menu appears on the on-screen 1: CD display. HIGHWAY VIEW POINT Press repeatedly to select the MY CHILDREN DANCING search method.
  • Page 27 To turn off the Control Menu You can change the display to show the elapsed Press DVD DISPLAY repeatedly until the playing time or remaining time. For details, see Control Menu disappears. “Checking the elapsed playing time, remaining time and titles” (page 62). To cancel searching Press O RETURN.
  • Page 28: Dvd - Various Functions

    To turn off the Control Menu Press DVD DISPLAY repeatedly until the DVD – Various functions Control Menu disappears. Changing the sound/ Notes • For discs not recorded in multiple audio formats, you subtitle/language cannot change the sound. • During DVD playback, the sound may change automatically.
  • Page 29: Displaying The Subtitles

    The display examples are as To turn off the subtitles follows: Select “OFF” in step 3. • PCM (stereo) To turn off the Control Menu PROGRAM FORMAT Press DVD DISPLAY repeatedly until the PCM 48kHz 24bit Control Menu disappears. Note •...
  • Page 30 x TRACK SELECTION (DVD only) Press repeatedly to select an item, then press ENTER. Gives priority to the sound track which contains the highest number of channels when you play a Press repeatedly to select a DVD on which multiple audio formats (PCM, setting, then press ENTER.
  • Page 31: Adjusting The Angle/Image

    x DATA CD PRIORITY (MP3 audio tracks Adjusting the angle/image and JPEG image files only) Set the priority data you want to playback when you playback the data disc which contains MP3 audio tracks and JPEG image files. If an MP3 audio track exists on the Changing the angles disc, the system recognizes the disc as (DVD only)
  • Page 32 To turn off the Control Menu x TV TYPE (DVD only) Select the aspect ratio of the connected TV. Press DVD DISPLAY repeatedly until the Control Menu disappears. 16:9 Select this when you connect a wide-screen TV or a TV Note with a wide mode function.
  • Page 33 x SCREEN SAVER To set the COMPONENT OUT setting to “PROGRESSIVE” Turn on and off the screen saver. If you turn on the screen saver, the screen saver image appears Press repeatedly to select when playback is stopped or paused for 15 “COMPONENT OUT”...
  • Page 34: Restricting Disc Playback

    To force the system to switch to Restricting disc playback INTERLACE when PROGRESSIVE is selected — CUSTOM PARENTAL CONTROL/ Make sure the function is set to DVD, then hold PARENTAL CONTROL down (DVD) on the unit and press DVD MENU on the unit. Notes Preventing playback of •...
  • Page 35 Press repeatedly to select To turn off the Custom Parental “ONt”, then press ENTER. Control function x If you have not entered a password In step 4, select “OFFt”, then press The display for registering a new password ENTER. appears on the on-screen display. Enter your 4-digit password using the numeric buttons, then press ENTER.
  • Page 36: Custom Parental

    x When you have already registered a Limiting playback by children password (DVD only) The display for entering the password appears on the on-screen display. — Parental Control You can limit the playback of some DVDs according to a predetermined level such as the CUSTOM SETUP PARENTAL CONTROL age of the users.
  • Page 37 Press repeatedly to select a To turn off the Parental Control geographic area as the playback function limitation level, then press ENTER. Set “LEVEL” to “OFF” in step 8. The area is selected. To change the password When you select “OTHERSt”, enter the area code in the table on page 38 using the In step 5, select “CHANGE PASSWORD numeric buttons.
  • Page 38: Speaker Settings

    Area code Speaker settings Area Code number Argentina 2044 — SPEAKER SETUP Australia 2047 To obtain the best possible surround sound, set Austria 2046 the size of the speakers you have connected and Belgium 2057 their distance from your listening position. Brazil 2070 Then use the test tone to adjust the volume and...
  • Page 39 x SIZE x DISTANCE When you connect or disconnect the center The default distance setting for the speakers in speaker, surround speakers or sub woofer, relation to the listening position is shown below. change the setting for CENTER, SURROUND and SUBWOOFER. Since the front speaker setting is fixed, you cannot change it.
  • Page 40: Speaker Setup

    x LEVEL Adjusting the speaker volume You can vary the level of each speaker as and level follows. Be sure to set “TEST TONE” to “ON” for easy adjustment. Press DVD SETUP when playback is Any items that are set to “NONE” in the “SIZE” stopped.
  • Page 41: Tuner

    Press TUNER MEMORY (or MEMORY on the unit). Tuner A preset number flashes in the display. The stations are stored from preset number 1. Presetting radio stations Preset number You can preset up to 20 FM stations and 10 AM stations.
  • Page 42 Other Operations Manual tuning preset Do this You can manually tune in and store the Tune in a station Follow the procedure described frequency of your favorite stations. with a weak signal in “Manual tuning preset” (page 42). Press FUNCTION +/– (or FUNCTION on Stop scanning Press TUNING MODE.
  • Page 43: Listening To The Radio

    To change the AM tuning interval Listening to the radio Use the buttons on the unit for the operation. The factory settings for AM tuning interval is You can listen to a radio station either by 9 kHz (or 10 kHz for some areas). To change the selecting a preset station, or by manually tuning AM tuning interval, select any AM station first, in the station.
  • Page 44: Manual Tuning

    Listening to non-preset radio station — Manual Tuning Press FUNCTION +/– (or FUNCTION on the unit) repeatedly until “TUNER” appears in the display. Press BAND (or TUNER/BAND on the unit) repeatedly to select “FM” or “AM”. Press TUNING MODE repeatedly until “MANUAL”...
  • Page 45: Tape - Play

    Playing a tape Tape – Play You can use TYPE I (normal) tape. Loading a tape Load a tape. Press A Z or Z B on the unit. Press FUNCTION +/– (or FUNCTION on the unit) repeatedly until “TAPE A” or Load a tape in deck A or B.
  • Page 46 Searching for the beginning of a track (AMS*) During playback, press . or > (or press .m or M> on the unit) repeatedly for the number of songs you want to skip forward (or backward). The search direction, + (forward) or –...
  • Page 47: Tape - Recording

    Recording a disc by Tape – Recording specifying track order Recording your favorite — Program Edit tracks on a disc onto a You can record tracks from all the discs in the order you want. Between steps 2 and 3 of tape “CD Synchro Recording”, do steps 2 to 6 of “Creating your own program”...
  • Page 48: Recording To A Tape Manually

    Note Recording to a tape You cannot listen to other sources while recording. Tips manually • When you record on both sides, be sure to start from the front side. If you start from the reverse side, — Manual Recording recording stops at the end of the reverse side.
  • Page 49: Sound Adjustment

    Selecting the preset Sound Adjustment effect Adjusting the sound Use the buttons on the unit for the operation. You can reinforce the bass and create a more Press one of the Preset Effect buttons to powerful sound. select the preset effect you want. Press X-GROOVE on the unit repeatedly.
  • Page 50: Adjusting The Graphic Equalizer And Storing The Personal File

    Adjusting the graphic Selecting the sound field equalizer and storing the Press SOUND FIELD +/– (or SOUND FIELD on the unit) repeatedly to select the sound personal file field you want. Each time you press the button, the display You can adjust the sound by raising or lowering changes cyclically as follows: the level of specific frequency band, then store When the headphones are not...
  • Page 51 To directly select Dolby Pro Logic PRO LOGIC: Performs Pro Logic decoding. The source recorded in 2 channels is decoded II sound fields into 4.1 channels. Press DOLBY PL II on the unit repeatedly to select “PLII MOVIE” or “PLII MUSIC”. PLII MOVIE: Performs Pro Logic II Movie Note mode decoding.
  • Page 52: Creating A Party Environment

    To cancel the X-ROUND effect Creating a party Press X-ROUND ON/OFF repeatedly until “X-ROUND OFF” appears in the display. The environment X-ROUND indicator turns off. Notes You can create a party environment by using • If you cannot get the sound effect you want, check X-ROUND for “moving”...
  • Page 53: Listening To The Sound In Another Room

    Listening to the sound in Enhancing video game another room sound — Multi Room — Game Sync You can place your front speakers in one room You need to connect a video game player (see and your surround speakers in another room. “Hooking up optional components”...
  • Page 54: Mixing Video Game Sound With Other Sound Source

    Mixing video game sound Singing along: Karaoke with other sound source — Game Mixing You can sing along with any multiplex VIDEO You can mix the sound from the component CD or audio CD. You can also output either the connected to the GAME INPUT jacks with left or right channel sound from both speakers another function.
  • Page 55: Mixing And Recording Sounds

    Other operations Mixing and recording Do this sounds Use VIDEO CDs or Turn on your TV and select DVDs the video input. Cancel karaoke mode Turn MIC LEVEL to You can “mix” sounds from any one of the “MIN”, disconnect the function and singing or speaking into a microphone from the MIC microphone.
  • Page 56 Tips • When you record on both sides, be sure to start from the front side. If you start from the reverse side, recording stops at the end of the reverse side. • If acoustic feedback (howling) occurs, move the microphone away from the speakers or change the direction of the microphone.
  • Page 57: Timer

    Waking up to music Timer — Play Timer Falling asleep to music You can wake up to music at a preset time — Sleep Timer everyday. Make sure you have set the clock (see “Setting the clock” on page 12). You can set the system to turn off after a certain Prepare the music source you want to time, so that you can fall asleep to music.
  • Page 58: Timer Recording Radio Programs

    Press ENTER. Timer recording radio The type of timer (“PLAY TIMER”), followed by the start time, the stop time and programs the music source appears in the display in turn before the original display returns. You can record from a preset radio station from Press ?/1 to turn off the system.
  • Page 59 Press DIRECTION on the unit Notes repeatedly to select “g” to record on • You cannot select the Play Timer and Timer Recording at the same time. one side. Select “j” (or “RELAY”) to record on both sides. • If you use the Timer Recording and Sleep Timer at the same time, the Sleep Timer has priority.
  • Page 60: Turning Off The Display

    Changing the power Display illuminator Turning off the display You can select the power illuminator you want. — Power Saving Mode Press ILLUMINATION on the unit repeatedly to select the power illuminator The demonstration display and the clock display you want when the system is turned on. can be turned off to minimize the amount of power consumed during standby mode (Power Each time you press the button, the power...
  • Page 61: Changing The Spectrum Analyzer Display

    Changing the spectrum Adjusting the brightness analyzer display of the display Press AMP MENU on the unit Press AMP MENU on the unit repeatedly to select “SPECTRUM”. repeatedly to select “DIMMER”. The last selected spectrum setting appears The last selected dimmer setting appears in in the display.
  • Page 62: Viewing Information About The Disc In The Front Panel Display

    x When playing a VIDEO CD (playback with Viewing information PBC functions) Elapsed playing time of the current scene about the disc in the front (for 8 seconds) t Effect status Clock display (for 8 seconds) t Sound field status (for 8 panel display seconds) t Karaoke effect status (for 8...
  • Page 63 x During “PGM” play mode Checking the total playing The last track number of the program and total time and titles number of programed step t The program step number t Track title t Clock display Press DISPLAY repeatedly when playback (for 8 seconds) t Effect status (for 8 seconds) is stopped.
  • Page 64: Viewing Information About The Disc In The On-Screen Display

    x When playing a VIDEO CD (playback with Viewing information PBC functions) • **:** about the disc in the Elapsed playing time of the current scene on-screen display x When playing an audio CD or VIDEO CD (playback without PBC functions) You can check the elapsed playing time and •...
  • Page 65: Checking The Date Information

    Checking the date information You can check the date information during playback when Exif* tag is recorded in the JPEG image files. Press DVD DISPLAY during playback. The Control Menu appears on the on-screen display. Date information 1: MOUNTAIN JPEG FAMILY 12 ( 34) BIRTHDAY 01 / 04 / 2004...
  • Page 66: Optional Components

    Optional Components Hooking up optional components To enhance your system, you can connect optional components. Refer to the operating instructions provided with each component. VCR or satellite Turntable tuner From the audio output To the audio input From the audio output jacks of the turntable jacks of the connected jacks of the connected...
  • Page 67 For details, consult your D VIDEO/SAT IN L/R jacks nearest Sony dealer. Use audio cords (not supplied) to connect an optional analog component (such as VCR or satellite tuner) to these jacks. You can then output audio through this system.
  • Page 68: Listening To Audio From A Connected Component

    Listening to a connected Listening to audio from a video game player connected component Connect the audio cords. See “Hooking up optional components” on Listening to a connected VCR page 66. Press FUNCTION +/– (or FUNCTION on Connect the audio cords. the unit) repeatedly until “GAME”...
  • Page 69: Recording Audio From A Connected Component

    Recording audio from a Recording audio on a connected component connected component Connect the audio cords. Making an analog recording See “Hooking up optional components” on page 66. Connect the audio cords. See “Hooking up optional components” on Start recording manually. page 66.
  • Page 70: Connecting External Antennas

    Connecting external antennas Connect an external antenna to improve the reception. FM antenna Connect an optional FM external antenna. You can also use the TV antenna instead. Ω AM antenna Connect a 6 to 15 meters insulated wire to the AM antenna terminal.
  • Page 71: Troubleshooting

    “Waking up to music” If the problem persists after doing all of the (page 57) and “Timer recording radio programs” above, consult your nearest Sony dealer. (page 58). There is no sound. When the ?/1 indicator flashes •...
  • Page 72 • Place the speakers as symmetrically as possible. appears on the display. • Check that the speakers are connected securely • Contact your Sony dealer or local authorized Sony and correctly. service facility. • Turn off the X-ROUND mode (page 52).
  • Page 73 OPEN/CLOSE on the unit to eject the disc. You cannot perform some function such as • Consult your nearest Sony dealer. Stop, Search, Slow-motion Play, Repeat Play, Shuffle Play, or Program Play. Playback does not start.
  • Page 74 Picture The JPEG image file cannot be played back. • Recording was not performed according to ISO There is no picture. 9660 Level 1, Level 2 or Joliet in expansion • Press FUNCTION +/– (or FUNCTION on the format. unit) repeatedly until “DVD” appears in the •...
  • Page 75: Tape Deck

    Tape deck The language for the sound track cannot be changed. The tape does not record or play, or there is a • Multilingual tracks are not recorded on the DVD decrease in sound level. being played back. • The tape heads are dirty (see “Cleaning the tape •...
  • Page 76: Messages

    If the system still does not Messages operate properly after performing the above measures or other One of the following messages may appear or troubles does not described flash in the display during operation. above occur, reset the system as follows: DVD/VIDEO CD/CD/MP3/JPEG Use the buttons on the unit for the operation.
  • Page 77 Timer OFF TIME NG! The on time and off time of Play Timer or Timer Recording is the same. SET CLOCK! You pressed CLOCK/TIMER SELECT before the clock is set. SET TIMER! You pressed CLOCK/TIMER SELECT before Play Timer or Timer Recording is set. PUSH SELECT! You tried to set the clock or timer during timer operation.
  • Page 78: Additional Information

    (with wax, If you have any question or problem concerning your oil, polish, etc.) as staining or discoloration of the system, please consult your nearest Sony dealer. surface may result. On heat buildup • Although the unit heats up during operation, this is not a malfunction.
  • Page 79 Notes on discs Before placing a tape in the tape deck • Before playing, clean the disc with a cleaning cloth. Take up any slack in the tape deck. Otherwise, the tape Wipe the disc from the center out. may get entangled in the parts of the tape deck and become damaged.
  • Page 80: Specifications

    4-track 2-channel, stereo GAME INPUT AUDIO L/R (phono jacks): Frequency response 50 – 13,000 Hz (±3 dB), sensitivity 250 mV, using Sony TYPE I tapes impedance 47 kOhms Wow and flutter ±0.15% W. Peak (IEC) GAME INPUT VIDEO (phono jack): 0.1% W.
  • Page 81 Speaker General Power requirements Front/Surround speakers SS-ZX10D Australian model: 230 – 240 V AC, Speaker system 2-way, bass-reflex type, 50/60 Hz magnetically shielded type Other models: 120 V, 220 V or Speaker units 230 – 240 V AC, 50/60 Hz Woofer: 22 cm, cone type Adjustable with voltage...
  • Page 82: Language Code List

    Language code list For details, see pages 28 and 29. The language spellings conform to the ISO 639:1988 (E/F) standard. Code Language Code Language Code Language Code Language 1027 Afar 1186 Scots Gaelic 1350 Malayalam 1513 Siswati 1028 Abkhazian 1194 Galician 1352 Mongolian...
  • Page 83: List Of Items That Can Be Displayed And Selected By Disc Type

    List of items that can be displayed and selected by disc type When you press DVD DISPLAY, the following items are displayed in the Control Menu. Control Menu Items Function DISC Display the disc title or disc type inserted into the system.
  • Page 84: System Setup Item List

    CUSTOM SETUP (page 29, 32) System setup item list VCD COLOR AUTO SYSTEM When you press DVD SETUP, the following NTSC settings are displayed. PARENTAL The default settings are underlined. CONTROLt LANGUAGE SETUP (page 29) TRACK SELECTION AUTO Select the language you want to AUDIO DRC use from the displayed language STANDARD...
  • Page 85: Glossary

    Dolby Surround Pro Logic Glossary As one method of decoding Dolby Surround, Dolby Surround Pro Logic produces four Album channels from two-channel sound. Compared with the former Dolby Surround System, Dolby Section of a music or picture piece on a data CD Surround Pro Logic reproduces left-to-right containing MP3 audio tracks or JPEG image panning more naturally and localizes sounds...
  • Page 86 Film based software, Video Parental Control based software A function of the DVD to limit playback of the disc by the age of the users according to the DVDs can be classified as Film based or Video limitation level in each country. The limitation based software.
  • Page 87 Region Code VIDEO CD This system is used to protect copyrights. A compact disc that contains moving pictures. A region code is allocated on each DVD unit or The picture data uses the MPEG 1 format, one of DVD disc according to the sales region. Each the worldwide standards for digital compression region code is shown on the unit as well as on the technology.
  • Page 88: List Of Button Locations And Reference Pages

    List of button locations and reference pages How to use pages 88 to 90 Illustration number Use these pages to find the location of buttons and PLAY MODE r (16, 22, 23, 25, 47, 48, other parts of the unit and remote that are mentioned in 73, 76) the text.
  • Page 89 23 456 7 89 q; qa qs e; wl PLAY MODE ta t; continued...
  • Page 90: Remote Control

    Remote control ALPHABETICAL ORDER SYMBOLS ?/1 (power) 1 (10, 12, 14, 58, A – E F – Z ALBUM + 7 (17, 19, 22) FM MODE 5 (44, 75) nN (play) 6 (16-18, 20, ALBUM – qa (17, 19, 22) FUNCTION +/–...
  • Page 92 Sony Corporation Printed in Malaysia...

Table of Contents