Operation Summary; Power On - Garmin NavComm SL30 User Manual

Getting Started
annunciator will light above the button when this
function is active.
ENT
Press
ENT
to save the Standby frequency.

Operation Summary

Power On

Turn the SL30 on. Either turn the Power/Volume knob
clockwise to turn the power on or, if installed, turn on the
master switch that powers the radios.
The SL30 will go through a short initialization routine
and then briefly display the last VOR check date. If you
turn the SL30 off for less then 15 seconds and then back
on, it will bypass the initialization process and return to
the last used display.
COM
Comm
Mode
Large - MHz
Small - kHz
Com - Monitor
Figure 2 - Operation Summary
4
ENT
to save selected values, to confirm a prompt, or
NAV
Nav System
Mode
Large - MHz
Small - kHz
Nav - Monitor
SYS
Mode
System Info
Nav Options
Com Options
VOR Equip Test
OBS
OBS
Mode
Large - Tens of degrees
Small - ones of degrees