Turning the Radio On and Off
IMPORTANT: To use the DSC capabilities of your radio, you must first enter an MMSI
number. See
page 15
To turn on the radio, press and hold the
Safety Identity (MMSI) number, you must press the
screen. To turn off the radio, press and hold the
TIP: For information on enabling auto power-on, see
Adjusting the Radio Volume
•
To turn up the radio volume, turn the
•
To turn down the radio volume, turn the
TIP: To set the appropriate volume level, first turn the squelch level to off, and then adjust the
volume. See below for more information on adjusting the squelch level.
Adjusting the Volume on a GHS 10 or a GHS 10i
1. Press the
VOL/SQL
2. Turn the
Channel
Adjusting the Squelch on the Radio
The squelch control allows you to suppress unwanted static when receiving.
1. When receiving, rotate the
2. Rotate the
Squelch
Adjusting the Squelch on a GHS 10 or a GHS 10i
1. Press the
VOL/SQL
2. When receiving, rotate the
3. Rotate the
Volume
Selecting Channels
Channel
•
Turn the
•
To change channels using the microphone, press the up or down arrow key. To scroll
quickly through the channels, press and hold the up or down arrow key.
See
page 36
for lists of International, Canadian, and USA channels.
VHF 100/200 Series Owner's Manual
Basic Operation
for more information.
16/9
Volume
key until the screen displays "CURRENT VOLUME."
knob on the handset to adjust the level.
Squelch
knob counterclockwise until you hear audio.
knob clockwise until there is no background noise.
key until the screen displays "CURRENT SQUELCH".
Volume
knob counterclockwise until you hear audio.
knob clockwise until there is no background noise.
knob clockwise or counterclockwise to change channels.
key. If you have not entered a Mobile Maritime
CLEAR
key to access the Home
16/9
key.
page
31.
knob clockwise.
Volume
knob counterclockwise.
Basic Operation