Recalling A Nav Channel - Garmin NavComm SL30 User Manual

Advanced Operation

Recalling a Nav channel

There are several lists of channels that you can recall from
memory in Nav mode. Remote Localizer, remote VORs,
the ten most recently used channels in Nav mode, and the
user-stored channels.
1. In Nav mode, press
2. Turn the
3. Turn the
in each list.
4. Press
Press the
active channel.
Remote ILS
Frequencies
First
Last
Press
Figure 6 - Recalling stored Nav channels
18
LARGE
knob to the desired list.
SMALL
ENT
to select the entry as the standby channel.
FLIP/FLOP
NAV Stored Frequencies and DST Data*
SEL
Press . Turn LARGE Knob
Auto Stored
Remote VOR
Frequencies
First
Last
ENT
to insert into Standby. Press
SEL
.
knob to view the available channels
button to select this entry as the
, then turn SMALL knob
List
(AUTO)
First
Last
to insert into Active.
.
Distance
User
Speed
Memory
Time
(USER)
Data
* Shown when
First
installed
external device
is sending data
Last