Garmin NavComm SL30 User Manual page 25

Remote Localizer List
If Localizer channels have been sent by an external device,
then this list will be the first displayed for convenience
while preparing for a landing. The list shows the airport
identifier on the left, a runway identifier for the station in
the center, and the channel frequency on the right. If
multiple Localizer frequencies are available at the
destination airport, a Y will be shown on the right side of
the display. The
entries in the order they were sent.
111.80 s117.40 PDX 10L 111.30Y
Remote VOR list
If VOR channels have been sent by a remote device, then
this list will be the next available. The channels show the
identifier, the "vor" label, and the frequency.
111.80 s117.40
Automatic Nav Channel List
The last ten used active frequencies are available. The
channels are stored in chronological order beginning with
the most recent used. Duplicates are not saved again, but
are moved to the front of the list.
111.80 s117.40
Nav User Channel List
The Nav channels that you saved are in this list. This list
is arranged alphabetically by name. Selection is simply by
means of rotating the
110.10 s113.00
SMALL
knob will scroll through the
UBG vor 117.40Y
autolist 111.80Y
SMALL
knob to view the channels.
UBG vor 117.40Y
Advanced Operation
19