System Mode; Obs Mode; Recalling Frequencies; Emergency Channel - Garmin NavComm SL30 User Manual

Getting Started

System Mode

In the System mode you can view software versions, setup
the Nav and Comm functions, and record VOR test
information. See the Advanced Operations section for
more details.

OBS Mode

Press the
lights, then you may use the
adjust the Omni Bearing Selector.

Recalling Frequencies

In the Comm or Nav modes, press
the available frequency lists of each mode. Turn the
LARGE
1. Press
2. Press
3. Turn the
4. Turn the
in the selected type.
5. Press
position or press
channel into the Active position. You can press
again to cancel selection.

Emergency Channel

The standard emergency channel (121.50 MHz) is stored
in the Comm memory of the SL30.
1. Press
SEL
one position counter-clockwise will reach it fastest.
2. Press the
channel the Active channel.
3. Listen, or key the Mic to send your message.
6
OBS
button. If the annunciator above the button
SMALL
and knobs to view the available channels.
COM NAV
or to go to the desired mode.
SEL
to go to the frequency database.
LARGE
knob to review the type of frequency.
SMALL
knob to display the available channels
ENT
to put the displayed channel into the Standby
FLIP/FLOP
COM
, if you aren't in Comm mode already. Press
LARGE
. Turn the
119.10 s124.55
FLIP/FLOP
LARGE
and
SEL
to put the displayed
knob to the Emergency channel,
emrgncy 121.50
button to make the Emergency
SMALL
knobs to
to gain access to
SEL