Comdial X34PT User Manual page 19

Automatic Callback
If the intercom station you have called is busy, you can queue to
the busy telephone.
1.
2.
3.
Dial 6 @ when you hear a busy signal.
Hang up. Your telephone will ring with five short tone
bursts when the one you called becomes idle.
After you lift the handset, the telephone you called will
ring. If you don't lift the handset, the callback is cancelled.
To cancel automatic callback before it rings:
1. Press@=@.
2. Hang up.
Automatic Dialing
This is one- or two-button dialing using programmable buttons
other than keypad buttons.
To automatically dial numbers,
0 Press button programmed for desired number.
If button is programmed on second level (under DSS button),
e Press Q HOLD and then press DSS button.
Automatic &dialing
If the last number you have called is busy or is not answering, use
this feature. Once activated, it automatically redials the number
once a minute for 10 minutes.
To activate automatic redial,
* Press button programmed for that purpose (that you have
labeled "auto redial").
l
Number will be dialed once a minute for 10 minutes.
Continued on next page . .
16