Table of Contents
Advertisement
&CD Messaging
System-supplied messages can be set at a station to be received
or displayed by a calling LCD speakerphone. These messages
give information on the status of the telephone user.
In the back of this guide there is a list entitled "LCD Messages."
Fill it in after the attendant gives you the List of messages.
To turn on message,
l
Dial the desired code number from yourmessage list. The
default messages of "Back At" and "Call" may be used:
For default message 1, which is "Back At," dial time
in twelve-hour format using the # as a colon.
For default message 2 which is "Call," dial
telephone number of where
YOU
will be.
l
Press
eor(---J
-
MNTR . Intercom light flashes steadily.
To turn off message and your intercom light,
* Press @a@@
.
Response Messaging
When you receive a secure off-hook voice announce, an off-hook
voice announce or a tone-signalled intercom call, this
preprogrammed feature lets you send a message back to the LCD
of the calling station.
The response messages are preprogrammed by the attendant and
stored in the system. You may send them by pressing a program-
mable button designated for sending messages
NOTE: When you send a response message, the calling party will be dis-
26
Advertisement
Table of Contents
