Call Override Features (continued)
Service Observing
For training purposes, this feature allows you, undetected, to
monitor a conversation at another station
To monitor an in-progress cab:
1. While on-hook, press @a@@.
2. Dial extension number of station you are going to monitor.
3. Press @
to end.
Call Waiting
You can send a call waiting tone to a busy station and wait for an
answer.
To activate call waiting:
1. Make intercom call and hear busy signal.
2. Dial @
@a.
CaLled party will hear tone.
3. Remain on line, waiting for called party response.
To cancel call waiting, hang up handset.
To answer call waiting if you receive a call waiting tone while on
a call:
1. Hear short tone burst in receiver.
2. Either place call on hold or complete present call and hang
up. Waiting call will begin ringing.
3. Lift handset to answer.
37