Comdial X34PT User Manual page 18

Intercom Calls (continued)
To tone call manually,
l
Lift handset.
l Press lTCM .
0
l
Dial extension number.
l Press lTCM
0
again. Called telephone will ring.
NOTE: Some systems muy be set up to tone signal as the first option.
Pressing Ii"CM a second time is not necessary in this case.
To tone
call
automatically (DSS),
l
Lift handset.
l
Press DSS button.
l Press lTCM .
0
When intercom party answers, two-way
conversation can take place.
Off-Hook Voice Announce (OHVA)
To make a voice announcement to another station that is off-hook
or busy on a call,
0' Make intercom call.
l
Hear either single tone burst for an OHVA or several quick
tone bursts for a SOHVA.
l
Make announcement. When you hear a busy tone, this
means the station is on the speakerphone and you cannot
make an announcement. The person you are calling will,
however, hear a ring from his telephone.
l
Wait on line for reply. If announcing from an LCD
speakerphone, called station may send non-verbal reply
for display, As response is displayed, the announcing
:
:;
station is disconnected.
NOTE: The caller cannot control how the announcement is received.
This depends upon the equipment used and class of service
programming.
15