The Agitator - Hoover U5063-930 Owner's Manual

9. Replace hood and nozzle control
knob.

The agitator

When to replace
Disconnect cleaner from electri-
cal outlet.
When agitator brushes are worn,
the agitator should be replaced.
To check condition of brushes,
move edge of card across bottom
plate while turning agitator. To
maintain cleaning effectiveness,
replace agitator if brushes do not
touch card.
What to buy
The agitator may be replaced with either a single or double row of brushes.
Single row of brushes - Hoover part No. 48414-051.
Double row of brushes -Hoover part No. 48414-049.
How to replace
Disconnect cleaner from electri-
cal outlet.
1. Remove hood as shown in steps
page 22.
shown.
3. Remove bottom plate as shown
in steps I-3 of "How to replace
belt," page 21.
4. Remove agitator from cleaner
and discard.
5. Reposition belt and new agitator
by referring to page 21 beginning
with step 5.
23