Cleaning The Agitator - Hoover CLEANJET EVO User Manual

CLEANING THE BRUSHBAR*
Turn the cleaner upside down. Remove any
threads or debris from the brush bar.

CLEANING THE AGITATOR*

Remove any threads or debris ensuring the
agitator can rotate freely.
THIS FEATURE VARIES ACCORDING
TO MODEL
Please check the underside of your
cleaner and follow the appropriate
instructions.
*Certain models only
CHANGING THE BRUSHBAR*
Press the dirty water tank release
1
lever and remove the dirty water
tank. Unscrew 4 retaining screws on
the top surface.
Unscrew 2 retaining screws located
3
on the underside of the detergent
nozzle. Remove the brushbar from
the nozzle.
THIS FEATURE VARIES ACCORDING TO MODEL
Please check the underside of your cleaner and
follow the appropriate instructions.
9
- -
IMPORTANT: Switch the cleaner off and
remove the plug from the electricity
supply before dismantling cleaner
Turn the cleaner over. Remove
2
the brushbar alignment brackets.
Replace the brush bar and attach to the
4
nozzle. Attach the alignment brackets and
assemble to the cleaner.
GB