The Belt - Hoover U5063-930 Owner's Manual

The belt

The belt on your HOOVER cleaner causes the agitator to rotate and is
important for the effective operation of the cleaner. The belt is located
under the bottom plate of the cleaner and should be checked from time to
time to be sure it is in good condition,
When to replace
To check belt, remove bottom plate as shown in "How to replace belt."
Replace belt if it is stretched, cut or broken.
What to buy
To assure effective operation, use only genuine HOOVER belts with your
cleaner. When purchasing a new belt, ask for Hoover part No. 38528-027.
2. Remove bulb by pulling straight
out of socket; push new bulb into
socket until it locks in place.
3. Place hood on cleaner body and
press firmly to snap all four latches.
Pull up on hood slightly to make
sure all four latches are secured.
4. Push nozzle control knob back
onto front of cleaner.
20