Carpet Height Adjustment - Hoover U5063-930 Owner's Manual

For maximum cleaning performance the following carpet height settings
are recommended.
BARE
FLOOR
Cleaner nozzle settings:
. Lowest setting (1):
Next setting (2):
l
Higher settings (3-4):
l
Note: If the cleaner is difficult to push, slide the knob to the next higher
setting.
Carpet height
adjustment
The cleaning of carpet and rugs
takes place at the nozzle.
It is necessary to raise and lower
the nozzle for various carpet pile
heights by sliding the nozzle
control knob to the correct setting.
For ease in sliding knob, the handle
should be in the upright position.
The nozzle will not move into the
adjusted position until the
cleaner handle is lowered to the
operating position.
for bare floors and low pile, level loop, kitchen
type carpet.
for other types of carpet.
for very deep pile carpet where easier
effort is desired, while maintaining
good c eaning performance.
HIGH
14