Cleaning Tools; Attach Hose To Cleaner; Select Proper Cleaning Tool - Hoover U5063-930 Owner's Manual

CAUTION: Agitator continues to
rotate while cleaner handle is in
upright position. Avoid tipping
cleaner or setting it on furniture,
fringed area rugs, or carpeted
stairs during tool use.
2

Cleaning tools

The tool set includes a hose,
wand(s), crevice tool, furniture
nozzle and dusting brush.
A. Attach hose to
cleaner
Turn cleaner OFF before attach-
ing or removing hose.
With cleaner handle in upright
position, open hose door and
insert hose connector until locked
in position. Suction will automati-
cally be diverted to the hose when
cleaner is turned on.
To remove hose, press latch on
hose connector and pull up.
Note: Hose must be removed
from hose door when cleaning
carpet and rugs to insure proper
cleaning performance.
cleaning tool
1. Dusting brush may be used for
carved furniture, table tops, books,
lamps, lighting fixtures, Venetian
blinds, baseboards, shutters, and
registers.
2. Furniture nozzle may be used
for upholstered furniture, draper-
ies, tapestries, mattresses,
clothing, automobile interiors, and
carpeted stairs.
3. Crevice tool may be used in
tight spaces, corners and along
edges in such places as dresser
drawers, upholstered furniture,
stairs, and baseboards.
4. Wand(s) used to give extra
length to your hose. Use it with
any of the above tools.
Additional wands can be pur-
chased by using the order form
located at the center of this
Owner's Manual. 16