Hoover U5063-930 Owner's Manual page 24

7. Remove hood by turning
cleaner over and removing nozzle
control knob on fromt of hood --
grasp knob and pull up.
8. Place handle in operating
position and turn cleaner over.
Insert end of flat screwdriver into
one of the four slots beside an
arrow on bottom of cleaner.
9. For slots nearest the rear
wheels, push handle of screwdriver
toward cleaner handle; for remain-
ing two slots, pry outward to
release latches.
IO. Turn cleaner over and lift off
hood.
pulley.
Extra effort may be required to
stretch new belt onto pulley.
Turn agitator, making sure the belt
is not pinched between agitator
and cleaner body. The belt must
rotate freely inside the belt guide.
If agitator does not turn, remove
bottom plate and reposition belt in
belt guide.
Continued + 22