Skoda 2013 Octavia A7 Owner's Manual page 72

Memory function of the electrically adjustable seat

First read and observe the introductory information and safety warn-
ings on page 67.
The memory function for the driver's seat provides the option to store the posi-
tions of the driver's seat and the external mirrors. Each of the three memory but-
tons » Fig. 52 can be assigned a set position.
B
Storing seat and exterior mirror settings for driving forward
›
Switch on the ignition.
›
Adjust the seat to the desired position.
›
Adjust both of the exterior mirrors
›
Press the button » Fig. 52.
A
SET
›
Within 10 seconds after pressing the
button .
B
An acknowledgment sound confirms the storage.
Saving front passenger mirror settings when reversing
›
Switch on the ignition.
›
Press the required memory button
›
Move the rotary knob for the exterior mirror control into position 
›
Engage reverse gear.
›
Adjust the front passenger's mirror to the desired position
›
Take the vehicle out of gear.
The set position of the exterior mirror is stored.
Retrieving the saved setting
›
Tap the desired memory button
and the driver's door is opened.
›
Press down on the desired memory button
and the driver's door is closed.
70
Using the system
Fig. 52
Memory buttons and SET button
» page 66.
button, press the desired memory
SET
» Fig. 52.
B
» page
» page 66.
» Fig. 52 when the ignition is switched off
B
when the ignition is switched on
B
Stopping the ongoing adjustment
›
Press any button on the driver's seat or the button
key.
Note
Each time you store the seat and exterior mirror settings for driving forward you
also have to re-store the setting of the exterior mirror on the passenger side for
reversing.
Memory function of the remote control key

First read and observe the introductory information and safety warn-
ings on page 67.
The automatic storage function of the driver's seat and exterior mirrors position
when locking the vehicle can be activated in the memory of the remote control
key.
When this function is activated, each time the vehicle is locked, the current posi-
tions of the driver's seat and the external mirrors are saved in the memory of the
remote control key. After subsequently unlocking the vehicle with the same key,
the driver's seat and the exterior mirrors assume the positions stored in the
memory of this key.
This function can also be activated/deactivated in the Infotainment
sanleitung Infotainment, chapter Vehicle settings (CAR button).
Activating the function
›
Unlock the vehicle with the remote control key.
›
Press and hold any memory button
assumed the position stored under this button, at the same time press the but-
ton on the remote control key within 10 seconds.

66.
The successful activation of the function is confirmed by an audible signal.
The seat and exterior mirror settings are not saved in the memory of the key,
which is already saved in the memory button.
The seat can be adjusted to the required position if necessary
After locking the vehicle, the current positions of the driver's seat and the exter-
nal mirrors are saved in the memory of the remote control key.
Deactivating the function
›
Unlock the vehicle with the remote control key.
on the remote control

» Bedienung-
» Fig. 52 on page 70. After the seat has
B
» page 68.

