Skoda 2013 Octavia A7 Owner's Manual page 252

Replacing the bulb for the licence plate light
Fig. 224 Remove the number plate light/replace the bulb

First read and observe the introductory information and safety warn-
ings on page 247.
›
Open the luggage compartment lid.
›
Insert a slotted screwdriver at the location indicated by the arrow
press it in lightly, and unlatch the springs.
›
Remove the lamp.
›
Pull the faulty bulb out of the holder in the direction of the arrow
›
Insert a new bulb into the holder.
›
Replace the lamp and lightly press it until the spring latches.
Rear light (Octavia)
Fig. 225 Remove cover/light
250
Do-it-yourself
Fig. 226 Installing the lamp connector/lamp

First read and observe the introductory information and safety warn-
ings
Removing
›
Open the luggage compartment lid.
›
Insert the clamp for removing the wheel trims
the hole at the position indicated by the arrow
» Fig. 224 - ,
›
Remove the cover in the direction of the arrow
›
Use the screwdriver from the tool kit
›
Grip the rear lamp assembly and carefully remove it by waggling it and pulling
» Fig. 224 - .
opposite the direction of travel.
›
Press together the interlocks on the connector in the direction of the arrow

» Fig. 226
1
›
Carefully remove the connector from the tail lamp assembly in the direction of
the arrow
2
Install
›
Insert the connector into the lamp and lock it securely.
›
Insert the light into the brackets in the body
›
Carefully press the tail lamp assembly into the bodywork so that the bolts
» Fig. 227
1
Be careful not to pinch the cable bundle between the bodywork and light.
›
Screw the tail lamp into place and install the cover.
›
Ensure that the cover engages firmly.
on page 247.
» page
» Fig. 225
» Fig. 225
» Fig. 225 -  to unscrew the lamp.
- .
.
» Fig. 226
on page 251 on the light latch with the mounts in the body
228, Vehicle tool kit into
- .
- .
- .
» .
