Skoda 2013 Octavia A7 Owner's Manual page 198

Chrome parts

First read and observe the introductory information and safety warn-
ings on page 194.
First clean the chrome parts with a damp cloth and then polish them with a soft,
dry cloth.
If this method does not completely clean chrome parts, use a specific chrome care
product.
CAUTION
Do not polish the chrome parts in a dusty environment - risk of surface scratches.
Decorative films

First read and observe the introductory information and safety warn-
ings on page 194.
Wash the films with a mild soap solution and clean, warm water. Never use harsh
cleaning products or chemical solvents, as this could damage the films.
The following instructions must be followed when washing the vehicle with a
high-pressure cleaner:
›
The minimum distance between the nozzle and the vehicle body should be 50
cm.
›
Keep jet perpendicular to the film surface.
›
The maximum water temperature is 50 °C.
›
The maximum water pressure is 80 bar.
CAUTION
In the winter months, do not use an ice scraper to remove ice and snow from the
areas with films. Do not use any other objects to remove frozen layers of snow or
ice – risk of film damage.
196
General Maintenance
De-icing windows and exterior mirrors


First read and observe the introductory information and safety warn-
ings on page 194.
Use a plastic ice scraper for removing snow and ice from the windows and mir-
rors.
The ice scraper can be found on the inside of the fuel filler flap.
›
Open the fuel filler flap.
›
Slide out the ice scraper in the direction of the arrow.
Regularly clean windows from the inside with clean water.
Dry the glass surfaces with a clean chamois leather or a cloth intended for this
purpose.
When drying the windows after washing the vehicle, do not use window leathers
that have been used to polish the bodywork. Residues of preservatives in the
window leather can dirty the window and reduce visibility.
CAUTION
The ice scraper should not be moved forward and backward but in one direction
■
to avoid any damage to the surface of the glass.
Snow or ice that is contaminated with coarse dirt such as fine gravel, sand or
■

salt must not be removed from the windows and mirrors – there is a risk of dam-
age to the surface of the windows and mirrors.
Do not remove snow or ice from glass parts using warm or hot water – risk of
■
cracks forming in the glass.
Fig. 176
Fuel filler flap: Ice scraper
» Fig. 176.
