Exterior Mirrors - Skoda 2013 Octavia A7 Owner's Manual

Exterior mirrors


First read and observe the introductory information and safety warn-
ings on page 64.
Mirror heater
›
Set the rotary knob into the position 
The mirror heater only operates when the engine is running and up to an outside
temperature of +35 ℃.
Adjusting both mirrors in sync
›
Set the rotary dial into position  or, on right-hand drive vehicles, into position
» Fig. 47. The movement of the mirror surface is identical to the movement of

the rotary knob.
The synchronous setting of both mirrors can be activated/deactivated in the Info-
tainment » operating instructions for Infotainment, chapter Vehicle settings (CAR
button).
Adjusting the front passenger's mirror
›
Set the rotary dial into position  or, on right-hand drive vehicles, into position
» Fig. 47. The movement of the mirror surface is identical to the movement of

the rotary knob.
Switching off operating control
›
Set the rotary knob into the position 
Folding-in both of the exterior mirrors with the rotary knob
›
Set the rotary knob into the position 
It is only possible to fold in both exterior mirrors when the ignition is switched on
and at a speed of up to 50 km/h.
66
Using the system
Fig. 47
Rotary knob
» Fig. 47.
» Fig. 47.
» Fig. 47.
The mirrors are folded back into the driving position after the rotary knob is
turned from the position  to a different one.
Folding-in both of the exterior mirrors using the remote control key
›
Press and hold the  symbol button on the remote control key.
Folding in requires that all electrical power windows are working
erational faults.
The exterior mirror is folded back into the driving position when the ignition is
switched on.
Folding in of both mirrors can be activated/deactivated in the Infotainment
erating instructions for Infotainment, chapter Vehicle settings (CAR button).
Automatic dimming mirror
The exterior mirrors are dimmed together with the automatic dimming interior
mirror » page 65.
Tilting surface of front passenger mirror
On vehicles fitted with the memory function for the driver seat
surface of the mirror tilts down slightly when the reverse gear is engaged and the
rotary knob is in the position  or in position  on vehicles with right-hand
drive » Fig. 47. This provides an aid in seeing the kerb of the pavement when
parking the car.
The mirror returns into its initial position, after the rotary knob is moved out of
the position  or position  on vehicles with right-hand drive, and put into another
position or if the speed is more than 15 km/h.
Tilting the surface of the front passenger mirror can be activated/deactivated in
the Infotainment » operating instructions for Infotainment, chapter Vehicle set-
tings (CAR button).
Memory function for mirrors
On vehicles fitted with the memory function for the driver seat
memory function for the remote control key
position of the exterior mirror when saving the driver seat position.
» page 47, Op-
» op-
» page 70, the
» page 70 or the
» page 70 it is possible to save the
