Skoda 2013 Octavia A7 Owner's Manual page 144

It is not possible to switch on the cruise control system if the selector lever is in
■
the position P, N or R (Vehicles fitted with an automatic transmission)
The Cruise Control System may automatically switch off when some brake as-
■
sist systems (e.g. ESC) intervene, when the speed exceeds maximum permissible
engine speed, or a similar event takes place.
The Cruise Control System also remains activated after shifting the gear!
■
Activating/deactivating

First read and observe the introductory information and safety warn-
ings on page 141.
Activating
›
Turn the switch » Fig. 134 into the ON position.
A
Deactivating
›
Turn the switch » Fig. 134 into the OFF position.
A
Storing and maintaining speed

First read and observe the introductory information and safety warn-
ings on page 141.
›
Activate the cruise control system
›
Drive at the desired speed.
›
Press the rocker button in position SET
B
After you have released the rocker button
you have just stored is maintained at a constant speed without having to depress
the accelerator.
142
Driving
Fig. 134
Operating lever: Rocker switch
and switch of the cruise control
system
» page 142.
» Fig. 134 on page 142.
out of the position SET, the speed
B
Changing the stored speed

First read and observe the introductory information and safety warn-
ings on page 141.

Increasing the speed with the rocker button
›
Press the rocker button in position RES
B
The speed will increase continuously, if the rocker button is pressed and held in
the RES position. Release the rocker button once the desired speed is reached.
The set speed is then stored in the memory.
Decreasing the speed with the rocker button
The stored speed can be reduced by pressing the rocker button
page 142 into the position SET.
The speed will decrease continuously, if the rocker button is pressed and held in
the SET position. Release the rocker button once the desired speed is reached.
The set speed is then stored in the memory.
If the rocker button is released at a speed of less than 25 km/h, the speed is not
stored and the memory is erased. The speed must then be stored again by press-
ing the rocker button in the position SET after increasing the speed of the ve-
B
hicle to more than 25 km/h.
Increasing the speed with the accelerator
›
Depress the accelerator pedal.
Releasing the accelerator pedal will cause the speed to drop again to the set
speed.

Decreasing the speed with the brake pedal
The speed can also be reduced by depressing the brake pedal, which temporarily
deactivates the system » page
Switching off temporarily

First read and observe the introductory information and safety warn-
ings on page 141.
The cruise control system is temporarily switched off by pressing the switch
» Fig. 134 on page 142 into the spring-tensioned position CANCEL or by de-
A
pressing the brake pedal.

The set speed remains stored in the memory.
B
» Fig. 134 on page 142.
B
B
142.
» Fig. 134 on

