Specifications For Gas Boosters - Rinnai PRESTIGE Operation & Installation Manual

SPECIFICATIONS FOR GAS BOOSTERS

Table 4 - Specifications - Gas Boosters
Model Name:
Boost Capacity:
- L/min. @ 20°C rise
- L/min @ 25°C rise
Maximum Rated Flow:
Minimum Supply Pressure for Maximum rated flow:
(1)
Minimum Flow for Operation:
Frost Protection:
Gas Consumption (Maximum / Minimum):
Star Rating (AS 4552 - 1998):
Hot Water Delivery Temperature:
Dimensions: Height x Width x Depth:
Weight:
(1) - Units will operate at lower pressures but the rated flow with not be achieved.
(2) - Gas boosters for Solar hot water applications should be preset to deliver a minimum temperature of 60°C.
Gas boosters factory pre set to 60°C or 65°C will be marked as such. If there are no temperature markings on the water
heater, on site conversion is required. This is a simple procedure, contact your Service Agent.
Rinnai Australia
(L/min)
(L/min)
(kPa)
(L/min)
(MJ/hr.)
(2)
(mm)
(Kg)
- 16 -
S20

20
16
20
120
2.4
Yes
125 - 18
5.5
60°C
530 x 350 x 194
15
Solar Split Systems Operating / Installation Manual- Version 8 - 18/10/10
S26

26
24
26
200
2.4
Yes
188 - 23
5.0
60°C
530 x 350 x 194
21