Framed Installations - Flat, Reverse & Side Pitch - Rinnai PRESTIGE Operation & Installation Manual

INSTALLATION OF SOLAR COLLECTORS
The frames are not suitable use in cyclonic areas. For the correct frame for use
in cyclone areas, contact your local Rinnai Solar distributor.
NOTE
FRAMED INSTALLATIONS - FLAT, REVERSE & SIDE PITCH
Table 8 - Framed Installations
Figure 26 - Flat Roof Frames
Figure 27 - Reverse Pitch Roof Frames
Figure 28 - Side Pitch Roof Frames
Rinnai Australia
•
For use on a flat roof or where the roof
pitch is too low.
•
This frame allows the Collectors to be
installed at a suitable inclination.
•
Installations instructions are provided in
the Rinnai Frame Installation Manual.
•
These comprise of a split system flat roof
frame and a side/reverse pitch kit.
•
They can be used when the Collectors
need to be installed in the reverse
direction to the direction the roof is facing.
•
For example, using a reverse pitch frame
on a South facing roof enables the
system to be oriented to the North.
•
Installations instructions are provided in
the Rinnai Frame Installation Manual.
•
These comprise of a split system flat roof
frame and a side/reverse pitch kit.
•
They can be used when the Collectors
need to be installed side on to the
direction the roof is facing.
•
For example, using a side pitch frame on
an East or West facing roof to enables
the system to be oriented to the North.
•
Installations instructions are provided in
the Rinnai Frame Installation Manual.
- 27 -
Solar Split Systems Operating / Installation Manual - Version 8 - 18/10/10