Table of Contents
Advertisement
COLLECTOR SPECIFICATIONS
Table 4 - Collectors Specifications
CHARACTERISTICS
CONSTRUCTION
- Selective Surface
Maximum Operating Pressure
Casing Material
Overall Dimensions
(L x W x H) (mm)
Weight empty
(STD/FTC) (kg).
Water volume (Litres)
Number risers
Potential Solar Output at
PTR relief conditions (kW)
Frost Protection
GAS BOOSTER SPECIFICATIONS
* Table 5 - Gas Boosters Specifications
Model Name
Boost Capacity:
- L/min. @ 20°C rise
- L/min @ 25°C rise
Maximum Rated Flow:
Minimum Supply Pressure for Maximum rated flow:
Minimum Flow for Operation:
Frost Protection:
Gas Consumption (Maximum / Minimum):
Star Rating (AS 4552 - 1998):
Hot Water Delivery Temperature:
Dimensions: Height x Width x Depth:
Weight:
(1)
- Units will operate at lower pressures but the rated flow with not be achieved.
(2)
- Gas boosters for Solar hot water applications should be preset to deliver a minimum temperature of 60°C.Gas boosters factory pre
set to 60°C or 65°C will be marked as such. If there are no temperature markings on the water heater, on site conversion is required.
Other models of Rinnai Infinity Water Heaters (including internal units) can be converted to solar gas boosters. Contact Rinnai for details.
Rinnai Australia
SPECIFICATIONS
MODEL NUMBERS AND SPECIFICATIONS
Enduro / Equinox
TYPE
- Waterways
- Absorber
High Performance
* FOR MORE INFORMATION ON FROST PROTECTION
(L/min)
(L/min)
(kPa)
(1)
(L/min)
(MJ/Hr.)
(2)
(mm)
(kg)
(SP200A) or
(EXT OR EXT FTC)
(SP200A FTC)
Flat plate
Copper
Aluminium
Sputtered Titanium Oxide
850 kPa
Aluminium
1940 x
1025 x
80
33 / 35
1.3
8
1.25
* Standard version - no frost protection
FTC Version - Frost Protection to -5°C
REFER TO WARRANTY BOOKLET
S20
20
16
20
120
2.4
Yes
125 - 18
5.5
60°C
530 x 350 x 194
15
- 12 -
Solar Close Coupled Operating / Installation Manual - Issue 7 - 16/9/10
Excelsior
Flat plate
Copper
Copper
1964 x
1047 x
81
35 / 38
1.5
10
S26
26
24
26
200
2.4
Yes
188 - 23
5.0
60°C
530 x 350 x 194
21
Advertisement
Table of Contents
