INSTALLATION OF SOLAR COLLECTORS
STANDARD INSTALLATION
Collector Mounting Component Pre Assembly for a Standard Installation
This installation is not suitable for use in cyclonic areas. For further details, please
contact your local Rinnai Solar distributor.
NOTE
•
Assemble the collector rail components as shown in Figure 18 below.
•
Only loosely attach the collector retainers to the rails.
MOUNTING RAIL
COLLECTOR RETAINERS
M6 BOLT, NUT &WASHER
Rinnai Australia
COLLECTOR SUPPORT STRAPS
COLLECTOR RETAINERS
M6 BOLT, NUT &WASHER
COLLECTOR SUPPORT STRAPS
Figure 18 - Collector Mounting Components
- 24 - Solar Split Systems Operating / Installation Manual - Version 8 - 18/10/10
MOUNTING RAIL