Return To The Factory Default Setting - Omron V400-R2 Series User Manual

Section 4
Setting Method

Return to the factory default setting

Return to the factory default setting
Factory default setting
Readable code types
Detail
conditions
Reading
conditions
LED
Buzzer
V400-R2 series
60
User's Manual
Menu sheet
_U2_
Item
JAN/UPC (A and E)/EAN(13 and 8), CODE39, Codabar(NW-7),
Industrial2of5, ITF, CODE128, CODE93, DataMatrix (ECC200), QR
code, Micro QR code, PDF417, and GS1 DataBar (RSS)
UPC/EAN detail UPC-A: Transfer C/D without an 0 in the beginning
settings
UPC-E: Transfer C/D without an 0 in the beginning
EAN-13: Transfer C/D
EAN-8: Transfer C/D
CODE39 detail Not calculate C/D
settings
Transfer C/D
Not transfer ST/SP
Codebar (NW-7) detail Not calculate C/D
settings
Transfer C/D
Not transfer ST/SP
Data character of at least 5 digits
Industrial2of5(STF) Not calculate C/D
detail settings
Transfer C/D
Code93 detail settings Transfer C/D
GS1-Databar(RSS) Transfer C/D
detail settings
GS1-128(EAN128) Disable FNC1 to GS conversion
detail settings
Reading method Trigger reading
(normal reading /
trigger reading)
Inverted code Black code only
Number of reading Once
verification times
Reading operation Single reading
Failed reading Transmit nothing
Number of reading Not specified
digits
Reading valid time 2 seconds
Plural reading reset 6 frames
time
READ OK LED illumination time: 200 ms
Enable the buzzer
Single-tone buzzer
Buzzer sound duration: 50 ms
Buzzer sound volume: Max
Command
U2
Setting content