Setting for the header and footer
Direct input header and footer of up to 4 digits can be set.
The number of digit output setting (p.86) can be included as 1 digit in the header.
E.g.: The following describes the steps for setting the header (AB).
Set the headers collectively (Applied to all codes)
Clear the header (Applied to all codes)
Set the footers collectively (Applied to all codes)
Clear the footer (Applied to all codes)
Setting start (ZZ)
Set the headers collectively (RY)
Set "A" (0A)
Set "B" (0B)
Setting end (ZZ)
Menu sheet
_RY_
_MG_
_RZ_
_PR_
Section 4
Setting Method
Command
RY
MG
RZ
PR
V400-R2 series
85
User's Manual