Power & Emergency Stop - Vision Fitness T9800 Series Owner's Manual

POWER
Ensure that your Treadmill is
properly connected to the Tr e a d m i l l
and a power outlet, then turn on
the power switch, located at the
front of the main frame. For safety,
remove the power cord when the
Treadmill is not in use.
EMERGENCY STOP
If at any time you need to stop the
Treadmill quickly, simply press the
Emergency Stop button. This will
instantly cut all power and the
Treadmill will come to a stop. To
resume your workout, you will
need to re-enter any data.
SAFETY MAGNET
Your VISION FITNESS Treadmill
will not start unless the Safety
Magnet is inserted into the circle in
the console overlay. You should
attach the clip end to your clothing.
If at any time you need to stop the
Treadmill quickly simply pull the
Safety Magnet off the console.
This will cut all power to the
Treadmill and it will come to a
complete stop. To resume your
workout, place the Safety Magnet
back in place. This will send you
back to the start-up mode.
7