Vision Fitness T9800 Series Owner's Manual page 26

COOL-DOWN MODE
After you have completed your
timed workout, the console will
display: "Cool Down". This is to
let you know that your program
has ended. You are now in a
manual mode cool down and
have control of the Speed and
Elevation. This lets you cool down
at your own pace.
ENDING THE PROGRAM
Once you feel your cool down has
elapsed, press the STOP button
and the Treadmill will stop.
NOTES FOR YOUR HEART RATE TRAINING PROGRAMS
• If there is no Heart Rate detected, the Treadmill will not adjust elevation.
• If the Heart Rate detected is higher than the Target Zone by 10 BPM the
console will "beep" and the dot matrix will display a warning message.
• If the Heart Rate detected is higher than the T arget Zone by 15 BPM, the
console will "beep" and the dot matrix will display a warning message.
This process will repeat until the Heart Rate has been reduced. If the
treadmill is at 0% elevation, the speed will decrease by 1 mph.
• If the user's Heart Rate is 20 beats over their Target Zone, the Treadmill
will Shut Down.
NOTE:
At all times the speed and elevation keys are operative for the user.
25