IntelliCarb Drop-In Ice Cooled Installation Guide
1522-2323-3023 D
Conversion Instructions for Valves Connected into Manifold
1.
Remove the cup rest, front panel, and drip tray.
2.
Remove insulation pad, 2 screws, and bracket (as shown below).
3.
Pull out the plug fitting and tubing with barb fitting of the desired valve for conversion.
4.
Place tubing with barb fitting into desired outlet on the manifold.
5.
Replace plug fitting in open outlet.
6.
Reassemble bracket, 2 screws, and insulation pad.
7.
Reassemble drip tray, front panel, and cup rest.
FRONT CONNECTION
CARBONATED WATER
OPTION
Publication Number: 630460204INS
-I
ROP
N
REAR CONNECTION
NON-CARB WATER
OPTION
- 10 -
BRACKET
PLUG FITTING
TUBING WITH
BARB FITTING
SCREW
OETIKER CLAMP
MANIFOLD
© 2003-2005, IMI Cornelius Inc.