60-Key Second Expansion Console Connection - ESI -1000 Installation Manual

Communications servers
Hide thumbs Also See for ESI-1000:
Table of Contents

Advertisement

ESI Communications Servers Hardware Installation Manual

60-Key Second Expansion Console connection

Notes: If connecting only one Expansion Console to a 48-Key Feature Phone, see "60-Key Expansion Console
connection," page I.8.
The 60-Key Second Expansion Console connects to the 60-Key Expansion Console and cannot connect
directly to the 48-Key Feature Phone (the only phone to which you can connect a 60-Key Expansion Console).
1. The Second Expansion Console (which
is physically identical to a 60-Key
Expansion Console) includes an
expansion "Y" cable (right)
Lay out the cable across the back
of the equipment so that the
AC adapter is on left and the end of
the cable is on the right.
2. Connect the right end of the
expansion "Y" cable to the appropriate
connector on the bottom of the 48-Key
Feature Phone (below).
3. Then, connect the expansion "Y" cable's middle plug to the 60-Key Expansion Console, the left plug to
the Second Expansion Console, and the AC adapter to an appropriate 110 VAC outlet to provide power to
the Second Expansion Console (above).
4. To keep cabling out of the way, thread the expansion "Y" cable into the slots on the bottom of the phone
and the two Expansion Consoles.
5. Program the keys on the two Expansion Consoles using the same procedure as with the Digital Feature
Phone (press PROGRAM 2).
6. If necessary, remove the clear plastic overlay from the keys on the two 60-Key Expansion Consoles.
7. For the customer's convenience, label the paper overlay to show how the keys are programmed (we suggest
you use the ESI System Programmer PC software application for this).
8. Install the labeled paper overlays on the two 60-Key Expansion Consoles.
9. Install the clear plastic overlays over the paper overlays, to protect them.
10. Use the provided Velcro
the 48-Key Feature Phone, and the right side of the 60-Key Expansion Console to the left side of the
Second Expansion Console).
1
This diagram shows the backs of the Expansion Consoles.
1
.
®
tape to attach the left side of the 60-Key Expansion Console to the right side of
Connectors on bottom of 48-Key DIgital Feature Phone
I.9
External connections

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Esi-600Esi-200Esi-100Esi-50

Table of Contents