60-Key Expansion Console Connection - ESI -1000 Installation Manual

ESI Communications Servers Hardware Installation Manual

60-Key Expansion Console connection

Notes: The 60-Key Expansion Console can be connected to only a 48-Key Feature Phone.
If connecting both a 60-Key Expansion Console and a 60-Key Second Expansion Console to a 48-Key
Feature Phone, see "60-Key Second Expansion Console connection," page I.9.
1. The 60-Key Expansion Console (right) includes an expansion cable.
Connect one end of the expansion cable to the appropriate connector
on the bottom of the Feature Phone (below). Then, connect the other end
of the expansion cable to the 60-Key Expansion Console.
2. To keep cabling out of the way, thread the expansion cable into the
slots on the bottom of the phone and 60-Key Expansion Console.
3. Program the keys on the 60-Key Expansion Console using the same
procedure as with the Digital Feature Phone (press PROGRAM 2).
4. If necessary, remove the clear plastic overlay from the keys on the
Expansion Console.
5. For the customer's convenience, label the paper overlay to show how
the keys are programmed (we suggest you use ESI System Programmer
for this).
6. Install the labeled paper overlay on the 60-Key Expansion Console.
7. Install the clear plastic overlay over the paper overlay, to protect it.
8. Use the provided Velcro
the 48-Key Feature Phone.
®
tape to attach the left side of the 60-Key Expansion Console to the right side of
Connectors on bottom of 48-Key DIgital Feature Phone
I.8
External connections