Esi Cordless Handsets; Expansion Consoles - ESI -1000 Installation Manual

ESI Communications Servers Hardware Installation Manual

ESI Cordless Handsets

ESI Communications Servers also support ESI's digital, Local IP, and Remote IP Cordless Handsets — both
the Cordless Handset II and the original ESI Cordless Handset models.
Cordless Handset II
The ESI Cordless Handset II includes seven familiar fixed feature keys, eight programmable feature keys, a
speakerphone, and a headset jack. The Base Station for the ESI Digital Cordless Handset II uses a standard
line cord and is line-powered; and the Base Station for each ESI IP Cordless Handset II (Local IP or Remote
IP) uses Ethernet cabling, and receives (and requires) Power over Ethernet (PoE). The ESI Remote IP
Cordless Handset II base station also includes a jack into which the user can plug an analog CO line. This
gives the home-based teleworker the convenience of using both home and business lines with the ESI
Remote IP Cordless Handset II. Each ESI Cordless Handset II model employs advanced DECT 6.0
technology which, as compared to the original ESI Cordless Handsets, allows more secure communications
and — through the use of one or more optional ESI Cordless Handset II Repeaters — greater range.
Original Cordless Handsets
The original ESI Cordless Handsets come in two sizes — small and large — and each includes four familiar
fixed feature keys, four programmable feature keys, and a headset jack. The Base Station for each ESI digital
Cordless Handset uses a standard line cord and is line-powered; and the Base Station for each ESI IP
Cordless Handset uses Ethernet cabling and receives (and requires) Power over Ethernet (PoE). The ESI
Remote IP Cordless Handset base station also includes a jack into which the user can plug an analog CO
line. This gives the home-based teleworker the convenience of using both home and business lines with the
ESI Remote IP Cordless Handset.
Important: The 48-Key IP Feature Phone II, Local IP Cordless Handset, and Remote IP Cordless Handset each draw up
1
to 7.25 watts
devices per the 802.3af standard. Most PoE switches adhering to this standard will provide up to 12.5 watts for
each Class 3 device.

Expansion Consoles

The 60-Key Expansion Console gives a designated user 60 additional programmable feature keys. The
Expansion Console is connected to its host 48-Key Feature Phone via a special cable (provided) and doesn't
require a separate station port of its own. Additionally, it may be connected to a 60-Key Second Expansion
Console via a special cable (provided with the 60-Key Second Expansion Console) so that one 48-Key Feature
Phone can have a total of 150 programmable feature keys.
Each ESI Communications Server has a maximum number of stations that can have one or two Expansion
Consoles (60-Key and 60-Key Second) installed in a fully configured system:
ESI-1000
128
Note: Regardless of ESI Communications Server model, a Base Cabinet can support a maximum of eight
Expansion Consoles, and each Expansion Cabinet can support a maximum of 24 Expansion Consoles.
1
The 48-Key IP Feature Phone II's power consumption takes into account an optional 60-Key Expansion Console.
at 48 volts DC; therefore, they advertise themselves to a Power over Ethernet switch as Class 3
Maximum Expansion Consoles
ESI-600
80
ESI-200 ESI-100
32 8
B.3
Phones
ESI-50
8