Toshiba e-STUDIO 16P Service Manual page 41

e-STUDIO 16P
Flash Memory Failure Service Error Code sh Memory Failure Service Error Code
The operator panel button has been pushed and a flash memory
failure service error has occurred.
Once the error code is displayed, if the operator panel button is
pushed again, the operator panel displays the service error
indication – all 6 indicator LEDs blinking. Continual pressing of the
operator panel button causes the LEDs to repeat in the following
order:
1. Service error indication
2. Flash memory failure service error code indication
3. Service error indication
Replace the Flash memory. If this does not correct the problem,
replace the controller board.
2-24
Service Manual
memory
Continual pressing of the