e-STUDIO 16P
Auto CRLF/LFCR
Off/On/Auto
Note: Auto CR after LF = on and auto LF after CR = on can only be
set through PJL. The printers configuration mode only allows the
user to set one or the other to on, or both to off. If configuration
mode is entered and both settings are set to on, the initial value
displayed shows both values off.
Setting Value
Auto CR after LF = off and
Auto LF after CR = off.
Auto CR after LF is on and
Auto LF after CR is off.
Auto CR after LF is off and
Auto LF after CR is on.
CR after LF = on and auto LF after CR = on can only be
ws the
Diagnostic Aids
3-33