Toshiba e-STUDIO 16P Service Manual page 110

e-STUDIO 16P
Brief button presses cause the printer to cycle through the various
values within the value list for the menu item displayed. For Parallel
Enabled – a brief button press causes the off/on/auto (Press
Button) LED to light. D to light.
Another brief press causes the off/on/auto (Press Button) LED to
blink.
Subsequent brief button presses cause the printer to cycle through
the valid values for the displayed menu item. When the setting you d values for the displayed menu item. When the setting you
want is displayed on the off/on/auto (Press Button) LED, a long
button press saves the displayed value. The printer indicates a
setting is being saved by displaying all LEDs on solid.
The following table shows which printer mode must be active for
each operation.
Operation
Print Buffer
Operator Panel Reset
Print Test Page
Print Font Samples
Print Directory
Format Flash
Set Demo Mode Active/Inactive
Print Demo
Diagnostic Tests
Print Quality Test Page/Registration Quality Test Page/Registration
Adjustment
Factory Defaults
Hex Trace
Execute Engine Cleaning Cycle
Parallel–Enable Port ble Port
ycle through the various
Mode
Normal
Normal, demo, and hex trace
Normal
Normal
Normal
Normal
Special function menu
Demo
Diagnostic mode
Normal and special function
menu
Normal and special function
menu
Special function menu
Special function menu
Configuration "Parallel Port"
on page 3-23.
Diagnostic Aids
3-17